Manufacturing

DRFT-3359

Prerequisite: None

Required skills/experience: Basic skills in math; fractions and decimals and basic computer skills. Examine the fundamentals of drafting, from the tools of the trade to industry specifics within this board drafting and CAD instructed class.

Book cost $135

Tuition fee $ 245

Hours: 45.00

DRFT-3361

Prerequisite: DRFT-3359 & DRFT-3360 plus basic computer skills.

Explore the basics of CAD geometry creation and manipulation using a variety of computer command inputs including keyboard shortcuts, toolbox icons, and mouse menu selection.

Tuition fee $ 245

Hours: 45.00

DRFT-3362

Prerequisite: DRFT-3361.

Work with computer graphics systems to create advanced two-dimensional and three-dimensional drawings and create principal views, auxiliary views, and axonometric projections from a single three-dimensional drawing.

Tuition fee $ 245

Hours: 45.00

INDT-3001

Prerequisite: None

Advanced exercises using the oscilloscope, DVM, and printed circuit boards. Build skills and confidence operating and troubleshooting AC circuits containing inductors, capacitors, and tuned circuits.

Tuition fee $ 245

Hours: 40.00

INDT-3345

Prerequisite: None

This interactive training experience is designed to provide you with an introduction to hydraulic components and their use in hydraulic circuits. Learn to identify and install, specify and select, analyze and design industrial hydraulic systems. You will also work with advanced circuits, pressure regulators, and solenoids, and learn how the components and circuits interact.

Tuition fee $ 245

Hours: 40.00

INDT-3346

Prerequisite: None

Experience a comprehensive grounding in the principles of pneumatics, types of components, and design of typical pneumatic circuits. Learn to construct complex industrial pneumatics circuits efficiently with emphasis on safety, valves, controls, actuators, timers, gauges, manifolds, motors, troubleshooting and more.

Tuition fee $ 245

Hours: 40.00

INDT-3347

Prerequisite: None

Take a close look at how circuits work. Use printed circuit boards to learn basic electrical theory, meter measurements, and troubleshooting techniques.

Tuition fee $ 245

Hours: 40.00

INDT-3348

Prerequisite: None

Learn to install, operate, and troubleshoot motor control circuits, including a switch, relay, and timer circuits. Take your first look at operating and troubleshooting single-phase motors.

Tuition fee $ 245

Hours: 40.00

INDT-3349

Prerequisite: None

Hands-on experience installing, operating and troubleshooting the motor control circuits used with DC and three-phase motors.

Tuition fee $ 245

Hours: 40.00

INDT-3350

Prerequisite: INDT-3349.

Thorough instruction and lab exercises develop refined skills in installation, programming, and troubleshooting Programmable Logic Controllers (PLCs).

Tuition fee $ 245

Hours: 40.00

MACH-3361

Prerequisite: None

CATIA is the leading product development solution for manufacturing organizations. You will design sketches and develop projects into solid modeling through building assemblies and making prints of models.

Book cost $90

Tuition fee $ 995

Hours: 42.00

MACH-3368

Prerequisite: MACH-3379 or OSHA 10 General Industry card and 80% or better on Shop Math Final Exam.

Breakdown the fundamentals of print reading including identifying print symbols, understanding title blocks, interpreting revisions, extracting print dimensions, identifying geometric dimensions, and tolerances. Perform precision measurement techniques using common shop measuring tools such as micrometers and calipers. Book included.

Tuition fee $ 295

Hours: 36.00

MACH-3375

Prerequisite: MACH-3379 or OSHA 10 General Industry card and 80% or better on Shop Math Final Exam AND MACH-3368 or 80% or better on MACH-3368 Final Exam.

Providing you with the foundation of technical skills needed to safely operate and set up CNC Lathes, this hands-on class includes: safety, coordinate grid system, common CNC lathe operations and tooling, tool installation, workpiece holding, tool and work offsets, setting up and running a part, and common G codes used in CNC lathes. Book included.

Tuition fee $ 495

Hours: 60.00

MACH-3376

Prerequisite: MACH-3375.

Acquire the basic skills used in common G-Code CNC Lathe Programming. Acquire hands-on practice in the following: common CNC lathe G-Codes, basic program structure, methods of programming, canned cycles for CNC common lathes, the order of operations, writing a CNC program, and running a part using a program you have written. Book included.

Tuition fee $ 495

Hours: 60.00

MACH-3377

Prerequisite: MACH-3379 or OSHA 10 General Industry card and 80% or better on Shop Math Final Exam AND MACH-3368 or 80% or better on MACH-3368 Final Exam.

Gain the essential skills needed to safely operate and set up CNC Mills. Theory and applied training include: safety, coordinate grid system, common CNC mill operations and tooling, tool installation, workpiece holding, tool and work offsets, setting up and running a part and common G-Codes used in CNC mills. Books included.

Tuition fee $ 495

Hours: 60.00

MACH-3378

Prerequisite: MACH-3377.

Designed to provide you with the basic skills used in common G-Code CNC Mill Programming, classroom and lab instruction includes common CNC mill G-Codes, basic program structure, methods of programming, canned cycles for CNC common mills, order of operations, writing a CNC program, and running a part using a program you have written. Book included.

Tuition fee $ 495

Hours: 60.00

MACH-3379

Prerequisite: None

Explore the most essential skills needed to work in a modern machine shop: safety and math. Practice converting fractional math statements to decimal statements, adding and subtracting decimals, solving common math problems such as feed calculations, and learn to pronounce decimal statements as a machinist would say them. Class includes OSHA 10-Hour General Industry training. Book included.

Tuition fee $ 195

Hours: 28.00

MACH-3380

Prerequisite: None

Required skills/experience: Basic computer skills. Improve your professional skill set by using a leading design and manufacturing software. You are introduced to basic drawing tools, geometry and curves, part features, and more. Knowledge of Feature CAM is useful in today's CNC production environment.

Tuition fee $ 295

Hours: 39.00

MACH-3382

Prerequisite: MACH-3381.

Take your manual lathe skills to the next level. Instruction covers boring, knurling, taper turning, offset turning and calculations associated with each operation. Project will be included.

Tuition fee $ 345

Hours: 40.00

MACH-3384

Prerequisite: None

Required skills/experience: Basic Computer and working knowledge of SolidWorks. Further enhance your SolidWorks skills by learning new and intricate 3-D editing techniques! Efficiently learn to model complex parts and create detailed drawings in a matter of minutes. Classroom topics will include global variables, linked dimensions, design tables and equations.

Tuition fee $ 295

Hours: 42.00

MACH-3386

Prerequisite: None

Required skills/experience: Strong knowledge of SOLIDWORKS. Distinguish yourself from the competition! Become a Certified SOLIDWORKS user. Designed to include a review of the essential components with practice to better equip your successful achievement of the Certified SOLIDWORKS Associate (CSWA) credential. The successful candidate will have a strong working knowledge of SOLIDWORKS. The final session will be the 3-hour exam.

Tuition fee $ 189

Hours: 12.00

WELD-3353

Prerequisite: None

Required skills/experience: Previous welding training. Receive 20 hours of welding lab use and expert instruction during your approved and scheduled time to hone your skills. PPE required.

Tuition fee $ 145

Hours: 20.00

WELD-3363

Prerequisite: WELD-3386 or 1 year documented work experience.

PPE required.

Tuition fee $ 295

Hours: 42.00

WELD-3386

Prerequisite: None

Thinking about welding but don't know where to start? Explore tools and equipment along with hands on training. Identify safety procedures used in today's industry. You will also be orientated to oxy-fuel, plasma arc, and air carbon arc cutting processes as well as proper safety practices. PPE required. Class includes OSHA-10 Construction Industry Training.

Tuition fee $ 295

Hours: 42.00

WELD-3390

Prerequisite: WELD-3386 or 1 year documented work experience.

Acquire technical steps of welding safety, gas metal arc welding metal transfer, shielding gasses, and equipment adjustments. Perform multiple pass fillet welds and groove welds on carbon steel plate in all positions. PPE required.

Book cost $25

Tuition fee $ 295

Hours: 42.00

WELD-3391

Prerequisite: WELD-3386 or 1 year documented work experience.

Produce fillet and groove welds on carbon steel plate in all positions. PPE required.

Book cost $25

Tuition fee $ 295

Hours: 42.00

WELD-3395

Prerequisite: WELD-3386 or 1 year documented work experience.

Explore the TIG processes for arc characteristics and safety. Weld on mild steel, stainless steel, and aluminum. PPE required.

Book cost $25

Tuition fee $ 295

Hours: 42.00

WELD-3401

Prerequisite: WELD-3386 or 1 year documented work experience.

Arc welding, welding safety, power sources, electrode classifications and selection of materials are explored. Skill training in all positions on mild steel material with DC welding current and some AC are included. Selected electrodes will be used to perform surfacing welds, as well as single and multiple pass fillet welds. PPE required.

Book cost $25

Tuition fee $ 295

Hours: 42.00