Construction

CNST-3346

Prerequisite: None

Designed to provide hands-on training in most phases of home repair and maintenance, you will learn the proper use of hand and power tools, carpentry basics, drywall, electrical, concrete and other projects as time allows.

Tuition fee $ 195

Hours: 30.00

CNST-3348

Prerequisite: None

Frustrated with broken sprinkler heads? Learn to troubleshoot and repair the basic problems commonly encountered with your irrigation system.

Tuition fee $ 39

Hours: 6.00

CNST-3349

Prerequisite: None

Tired of looking at the small dents, cracks or holes in your walls? This hands-on class will prepare you to fix damage to your drywall with instruction in industry-proven techniques and proper material needed to achieve expert results! Bring safety glasses.

Tuition fee $ 35

Hours: 4.00

CNST-3350

Prerequisite: None

Paint has the power to transform the look of your house in less time and with less cash than any other remodeling project. Practice the tips and tricks professional painters use to take the messy and misery out of your next painting project. Bring safety glasses.

Tuition fee $ 35

Hours: 4.00

CNST-3351

Prerequisite: None

Knock knock! Who's There? Want to replace that old ugly door with a nice new door to see who's on the other side? Everything you need to know to replace and hang a door the right way! Bring safety glasses.

Tuition fee $ 59

Hours: 6.00

CNST-3352

Prerequisite: None

Do you have a piece of furniture in need of a face lift? Practice how to strip and refinish a piece of furniture. You supply small piece or personal project i.e. chair, end table, or small stand. Supply list provided. Bring safety glasses, mask, and gloves.

Tuition fee $ 79

Hours: 8.00

CNST-3353

Prerequisite: None

Take the guess work out of window replacement with hands-on instruction including removal of existing windows, installing new windows and associated trim work. Bring safety glasses.

Tuition fee $ 35

Hours: 4.00

CNST-3354

Prerequisite: None

Countertops looking a little dated? Remove and replace laminate counters. Make your kitchens, bath and laundry rooms, and bar tops "Pop" with new laminate in this hands-on training . Bring safety glasses.

Tuition fee $ 79

Hours: 8.00

CNST-3355

Prerequisite: None

Want to improve the look of your home's exterior? Have a rental property in need of repair? Learn how to prepare walls, layout vinyl siding and trim on an existing structure in this "How To" class! Bring safety glasses.

Tuition fee $ 35

Hours: 4.00

CNST-3358

Prerequisite: None

Do you want to bring new life to your countertops just like they do on HGTV? Old countertops can look like granite, stone, or marble using the Granicrete System. You will become a certified Granicrete installer during your class.

Book cost $30

Tuition fee $ 129

Hours: 15.00

CNST-3359

Prerequisite: None

Have you seen the latest trend in home improvement on HGTV? The Granicrete system will bring new life to old floors and patios. You will become certified by Granicrete International during your class.

Book cost $30

Tuition fee $ 129

Hours: 15.00

CNST-3361

Prerequisite: None

Do you want to spruce up your yard or patio and make sitting outside comfortable on a sunny day? Perform basic construction techniques and skills needed to build your own shade structure. Bring safety glasses.

Tuition fee $ 129

Hours: 16.00

CNST-3362

Prerequisite: None

Basic roofing repair skills come in handy especially after strong Oklahoma winds come sweeping across your home. Identify different roof structures. Practice replacing damaged shingles, flashing, and sealing techniques.

Tuition fee $ 35

Hours: 4.00

CNST-3363

Prerequisite: None

Laying ceramic tile the right way can be an art. Explore the techniques of proper measuring, estimating, cutting, spacing and grouting. Bring safety glasses.

Tuition fee $ 79

Hours: 8.00

CNST-3365

Prerequisite: None

Future carpenters wanted. Construct a 10'X10' shed with ceiling joists and a door in this fast paced, hands-on class. Knowledge of hand and power tools recommended.

Tuition fee $ 119

Hours: 15.00

CNST-3372

Prerequisite: None

Just bought an old house that could use a face lift? Learn to measure, cut and install crown molding, door/window and baseboard trim the right way.

Tuition fee $ 35

Hours: 4.00

CNST-3373

Prerequisite: None

Replace that old linoleum flooring with beautiful wood flooring. Want to be able to install the new floor yourself? Build your confidence and skill in this "How To" class.

Tuition fee $ 35

Hours: 8.00

ELTC-3355

Prerequisite: None

Don't be intimated by minor electrical repairs for your home. With step-by-step instructions on troubleshooting and repair of fixtures, outlets, ceiling fans and more, you'll feel confident in no time! Bring safety glasses.

Tuition fee $ 35

Hours: 4.00

ELTC-3356

Prerequisite: None

NFPA 70 NEC 2014 book required; must be purchased in advance. Photo ID required.

Tuition fee $ 79

Hours: 6.00

ELTC-3357

Prerequisite: None

Gain the confidence you need to take the Unlimited Electrical Journeyman License exam in this comprehensive training class. Review the theory, calculations and applications of the current code version and prepare yourself to navigate the reference books used in the exam. Online practice exams will also be utilized. Home computer and internet access required.

Book cost $185

Tuition fee $ 295

Hours: 42.00

ELTC-3359

Prerequisite: None

Ready to get started in the electrical trades? Begin with the basics of safety, tools, and equipment, and then move on to measurements, interpreting schematics, and wiring basics circuits, terminations, switches, and receptacles.

Tuition fee $ 295

Hours: 42.00

ELTC-3360

Prerequisite: ELTC-3359 Build on your basic electrical knowledge by exploring several electrical lighting installation methods with an emphasis in performing these tasks according to Code rules.

Projects will include single pole lighting, 3-way lighting, 4-way lighting, and wiring receptacles and outlets.

Book cost $210

Tuition fee $ 295

Hours: 42.00

ELTC-3361

Prerequisite: ELTC-3360 Take your electrical installation skills to the next level by practicing wiring and installing a variety of common electrical projects - including ceiling fans, exhaust fans, smoke and motion detectors, dimmers, door bells, appliance branch circuits, underground installations, NEMA ratings, and types of receptacles.

Book cost $105

Tuition fee $ 295

Hours: 42.00

ELTC-3362

Prerequisite: ELTC-3361 Enhance your electrical skills by stepping into the world of wiring for low voltage systems.

This includes jobs such as security and fire alarm systems and communication cabling for data, voice, video, coax, and cat 5 as well.

Tuition fee $ 295

Hours: 42.00

HVAC-3334

Prerequisite: None

Determine the correct capacity of heating and cooling equipment using the ACCA Manual J method, both manually and utilizing a computer. Plus an introduction to psychrometrics.

Book cost $95

Tuition fee $ 245

Hours: 40.00

HVAC-3335

Prerequisite: HVAC-3334.

Identify calculations required for residential air distribution and duct sizing using ACCA Manual D. Indoor air quality is also included.

Book cost $75

Tuition fee $ 245

Hours: 40.00

HVAC-3336

Prerequisite: HVAC-3335 or current state Journeyman or Contractor's license.

Discover fundamental principles and applications of refrigeration. You'll get hands-on experience through lab activities, shop demonstrations and mechanical mock-up simulations.

Book cost $220

Tuition fee $ 345

Hours: 60.00

HVAC-3338

Prerequisite: HVAC-3335 or current state Journeyman or Contractor's license.

Discover the effects of voltage, amperage, and resistance on electrical controls, motors, and wiring diagrams. In the lab, you'll practice how to wire components of heating and air conditioning systems. Class includes OSHA-10 Construction Industry Training.

Book cost $220

Tuition fee $ 345

Hours: 60.00

HVAC-3339

Prerequisite: HVAC-3336 and HVAC-3338.

Proper installation, service and repair of residential air conditioning units is the emphasis of this class.

Book cost $220

Tuition fee $ 245

Hours: 40.00

HVAC-3340

Prerequisite: HVAC-3336 and HVAC-3338.

Learn how to install, service and repair all types of home heating systems; natural gas, propane, or electrical resistance.

Book cost $220

Tuition fee $ 245

Hours: 40.00

HVAC-3341

Prerequisite: HVAC-3339 and HVAC-3340.

Topics covered are design, installation, and maintenance of heat pumps. Hands-on experience troubleshooting wiring problems during lab exercises.

Book cost $220

Tuition fee $ 245

Hours: 40.00

HVAC-3342

Prerequisite: None

EPA Section 608 Certification students please note, it is recommended that you enroll at least two weeks prior to the class start date to allow time to study your materials in preparation for the certification exam. Enrollments can be taken by phone or in person at the Tulsa Tech Career Service Center, 3420 S. Memorial Drive. Upon enrollment, you will receive a Preparatory Manual, Study Guide and information on how to access free online practice exams. Classes are taught in English; however, the exam is available in Spanish. Prepare for and take the exam meeting all the requirements of Section 608 of the Federal Clean Air Act for refrigerant handling. The first half of the class provides an overview of all the information air conditioning and refrigeration service personnel will need to successfully become certified as a universal technician. During the second half of the class, you will take the online certification exam. You are allowed one free exam re-take; retake dates will be announced on the first night of class. No hands-on recovery training is provided. Manual and Exam Fee required.

Book cost $30

Tuition fee $ 89

Hours: 8.00

HVAC-3343

Prerequisite: None

Prepare for the Mechanical Journeyman License exam by learning the standards, regulations, and applications of the current code versions. You will also review Math for Plumbers and Pipefitters and the Code of Federal Regulations. Home computer and internet access required.

Book cost $335

Tuition fee $ 245

Hours: 40.00

HVAC-3352

Prerequisite: None

Hands-on class covers different types of low-pressure boilers and chillers using both hot water and steam. Includes boiler components, accessories, and specialty tools, both centrifugal and absorption chillers.

Book cost $95

Tuition fee $ 195

Hours: 30.00

HVAC-3353

Prerequisite: HVAC-3352.

In-depth information on proper start-up and shut-down procedures of boiler operations and maintenance are focused on during this class. An overview of boiler components, accessories and tools wrap-up the content.

Book cost $100

Tuition fee $ 195

Hours: 30.00

HVAC-3354

Prerequisite: None

Instructional areas included: operation, service and some repair of larger capacity units typically found in commercial applications; including hermetic and semi-hermetic compressors, reciprocating, scroll and screw compressor applications.

Book cost $220

Tuition fee $ 245

Hours: 40.00

HVAC-3355

Prerequisite: None

Topics included are refrigeration cycle and components of refrigeration systems including metering devices, evaporators, compressors, condensers, accessories, and access valves.

Book cost $220

Tuition fee $ 245

Hours: 40.00

HVAC-3359

Prerequisite: None

This class has been approved by the Construction Industries Board Mechanical Examining Committee for 6 hours of CE credit. Photo ID required.

Tuition fee $ 75

Hours: 6.00

MSRY-3341

Prerequisite: None

Build with your own two hands. Get demonstrations and hands-on practice mixing and spreading mortar, laying bricks, rocks, and cinder blocks to a line and with a level.

Tuition fee $ 89

Hours: 12.00

MSRY-3342

Prerequisite: MSRY 3341.

Cozy up to your hand built fire pit after mastering the Masonry Fundamentals class.

Tuition fee $ 49

Hours: 6.00

MSRY-3343

Prerequisite: MSRY-3341, Have the best yard in the neighborhood when you build your own flowerbed after mastering the Masonry Fundamentals class.

Tuition fee $ 49

Hours: 6.00

MSRY-3344

Prerequisite: MSRY-3341 Build your own safe and secure mailbox after mastering the Masonry Fundamentals class.

Tuition fee $ 49

Hours: 6.00

PLMB-3346

Prerequisite: PLMB-3345.

Discover important facets of the drain waste and vent system including design, installation, connecting, testing and more; installing roof, floor and area drains will also be covered. You will also learn the functions of the water distribution system and identify proper techniques for locating, installing, and testing complete water service and distribution systems. Other topics of discussion include sewage and sump pumps, corrosive resistant waster and compressed air.

Book cost $110

Tuition fee $ 299

Hours: 40.00

PLMB-3347

Prerequisite: PLMB-3346.

Discover important facets of the drain waste and vent system including design, installation, connecting, testing and more; installing roof, floor and area drains will also be covered. You will also learn the functions of the water distribution system and identify proper techniques for locating, installing, and testing complete water service and distribution systems. Other topics of discussion include sewage and sump pumps, corrosive resistant waster and compressed air.

Tuition fee $ 299

Hours: 40.00

PLMB-3348

Prerequisite: PLMB-3347.

Identify how to read and interpret construction drawings and explore additional topics including how to size water supply systems, principles and hazards of backflow, and design, installation and troubleshooting booster and recirculating systems.

Book cost $40

Tuition fee $ 299

Hours: 40.00

PLMB-3349

Prerequisite: PLMB-3348.

Gain an understanding of quality practices in service plumbing including diagnosis and repair procedures for the most common services calls. You will also review concepts and practices essential for a competitive, successful plumbing business.

Book cost $25

Tuition fee $ 299

Hours: 40.00

PLMB-3350

Prerequisite: PLMB-3349 or 3 years recent trade experience.

Understand how the codes are written, adopted, modified and implemented. In addition, prepare for the Oklahoma Plumbing Journeyman and Gas exam by learning the standards, regulations, and applications of the current code versions. You will also review Math for Plumbers and Pipefitters and the Code of Federal Regulations.

Book cost $355

Tuition fee $ 475

Hours: 60.00

PLMB-3351

Prerequisite: None

From tough clogs to leaky bowls and tanks, many common toilet problems are easy to fix! Practice repairing the most common toilet issues and also learn to install a new one. Bring safety glasses.

Tuition fee $ 35

Hours: 4.00

PLMB-3352

Prerequisite: None

Plumbing problems got you down? Don't be driven crazy by that dripping leaky faucet. Fix leaks, clogged toilets, clogged drains and snake a drain like a pro. Bring safety glasses.

Tuition fee $ 79

Hours: 8.00

PLMB-3353

Prerequisite: None

This class is approved by the Construction Industries Board Plumbing Examining Committee for 6 hours of CE credit. Topics will include coverage of the new 2015 Plumbing and Fuel Gas Codes. Photo ID required.

Tuition fee $ 75

Hours: 6.00

WELD-3399

Prerequisite: None

Making art projects is easy with basic welding skills designed to teach you best safety practices, machine operations, metallurgy, and cutting processes. Discover how to bead, tack, and fillet welds to make sculpture projects.

Tuition fee $ 175

Hours: 32.00

WELD-3400

Prerequisite: None

Required Skills/Experience: 1 year Documented welding experience. Are you a welding hobbyists needing to brush up on your skills? This class covers safety, oxyfuel, MIG, and cutting. Start/work on project with instructor approval.

Tuition fee $ 295

Hours: 42.00